Datasheet

Identification of accessories and management of safety:
probes and adapters, a sort of "plug and play" of measurement, are
recognized immediately when connected. The instrument not only identifies them,
but also informs itself of their characteristics. Active safety is built in, notably in the
form of safety information and recommendations concerning the accessory used.
The ETHERNET interface and its WEB server open up new ways of working and
communicating, local or remote, with a convenience and effectiveness that will
quickly make them necessities. All that is needed for communication is that the other
equipment (printer, PC, etc.) should have, like the OX 7000, an IP address.
Thus, even on the road, you can print results on a network printer, exchange files
between the OX and a computer. You can also interrogate the instrument remotely
from any PC, display the traces in real time, control it using the instrument panel.
Whether locally or at a distance, these transfer and exchange operations are simple
and rapid and do not require special software on the computer, thanks to the WEB
server.
These portable oscilloscopes, tools for industrial and electronic maintenance,
therefore for the first time eliminate the traditional problems of printing, backups, and
the documentation of traces. The distance between the place of troubleshooting
and the office becomes virtual.
7
Configuring communications is very
simple because, in most cases, the IP
address of the instrument is provided
automatically by the local server;
simply enter the address of the
printer to be
used.
In the oscilloscope or multimeter mode, the
web server ensures unparalleled
effectiveness, very simply, with no need to
install software on the local or remote PC.
Series OX 7000 instruments are available in
a version with a high-quality metallic
carrying case to protect the instrument
and provide convenient
storage for the
probes and
measurement
accessories.
DISTANCE AND EQUIPMENT PROBLEMS ELIMINATED