Datasheet

HX0072
Amp FLEX current probe
5 A - 3,000 ARMS / 200 kHz
The HX0072 is a Probix AmpFLEX sensor designed to
measure AC currents up to 3,000 A
RMS in the context of
power transmission and machinery.
HX0030A
1/10 voltage probe
The HX0030A probe allows you to read the measurements directly by means of
automatic scaling and choice of the measurement unit (no adjustments on the
SCOPIX
analyser-oscilloscope). It is equipped with 2 configurable buttons for remote control of a
SCOPIX.
RATED VOLTAGE
LED for lighting
the work area
Colour-coded rings
associated with
the curve
PROBIX VOLTAGE MEASUREMENT
PROBIX CURRENT MEASUREMENT
HX0034
0.02 A – 60 ARMS / 1 MHz current clamp
The HX0034 clamp-on ammeter uses a Hall-effect cell to measure DC or AC currents up
to 80 A peak, without intervention on the electrical installation. Its internal electronics are
powered by the oscilloscope via the connection cable. The measurement output is fully isolated
to ensure safety. It is equipped with 2 configurable buttons for remote control of a
SCOPIX.
The DC offset is applied automatically by pressing a button.
HX0073
MiniAmp FLEX current probe
1 A - 300 ARMS / 3 MHz
The HX0073 is a Probix MiniAmpFLEX sensor for
measuring AC currents up to 300 A
RMS
on switchboards
or power electronics.
Attenuation
1 : 10
Bandwidth
DC at 250 MHz
Input capacitance
15 pF
Compensation range
±1 % (V DC)
Rise time
12 ns
Input impedance
10 MΩ
IEC 61010-031 safety
1,000 V Cat. II / 600 V Cat. III