Datasheet

ManualsBrandsMetrix ManualsMiscellaneous Test AccessoriesNiMH Battery - C.A 8220 & C.A 8230 Power Analysers

906211176 - Ed.2 - 12/2008 - Non contractual document. Confirm specifications before ordering.

References for ordering

FRANCE

Chauvin Arnoux

190, rue Championnet

75876 PARIS Cedex 18

Tel: +33 1 44 85 44 86

Fax: +33 1 46 27 95 59

export@chauvin-arnoux.fr

www.chauvin-arnoux.fr

MIDDLE EAST

Chauvin Arnoux Middle East

P.O. BOX 60-154

1241 2020 JAL EL DIB (Beirut) - LEBANON

Tel: +961 1 890 425

Fax: +961 1 890 424

camie@chauvin-arnoux.com

www.chauvin-arnoux.com

For assistance and ordering

UNITED KINGDOM

Chauvin Arnoux LTD

Waldeck House - Waldeck Road

MAIDENHEAD SL6 8BR

Tel: +44 1628 788 888

Fax: +44 1628 628 099

info@chauvin-arnoux.co.uk

www.chauvin-arnoux.com

ACCESSORIES

HX0061 In-Vehicle Charger

The HX0061 enables the SCOPIX to be powered by a vehicle

battery. This accessory is connected to the standard

SCOPIX

power supply. It is ideal for users on the move, allowing them

to recharge the instrument's battery in their vehicle between

two series of measurements.

Max. input voltage

10 V

to 60 V

Output voltage

115 V

to 160 V

Power supplied

32 W max.

Protective fuses 2 fuses: 5 x 20 – 0.63 A – 250 VT

Reference standard

European directive 2004/104/CE-2004

HX0063

Spare SCOPIX Battery Kit

This accessory can be used to recharge a SCOPIX battery after

removing it from the instrument. This kit comprises a battery/

external charger transition connector and a spare NiMh battery.

The HX0063 can be connected to the external battery charger

(external power supply) delivered as standard with the

SCOPIX.

HX0071 Industrial Accessories Kit

HX0030A 1/10 - 250 MHz current probe

HX0031 Probix / BNC adapter

HX0032 Probix / BNC 50

adapter

HX0033 Probix / banana adapter

HX0034 0.02 A - 60 A / 1 MHz current clamp

HX0035 Probix / K thermocouple adapter

HX0036 Probix / Pt100 probe

HX0061 10-60 VDC in-vehicle charger

HX0063 Scopix spare battery kit (NiMh 9.6 V battery pack

and a battery/charger transition connector)

HX0071 Industrial accessories kit for HX0030 and HX0030A

HX0072 Amp

FLEX

current probe 5 A - 3,000 A / 200 kHz

HX0073 MiniAmp

FLEX

current probe 1 A - 300 A / 3 MHz

Ø 4 mm Ø 4 mm

Ø 2 mm

50 cm

Ø 4 mm

Summary of content (4 pages)

PAGE 1
ACCESSORIES HX0061 In-Vehicle Charger HX0063 Spare SCOPIX Battery Kit The HX0061 enables the SCOPIX to be powered by a vehicle battery. This accessory is connected to the standard SCOPIX power supply. It is ideal for users on the move, allowing them to recharge the instrument's battery in their vehicle between two series of measurements. This accessory can be used to recharge a SCOPIX battery after removing it from the instrument.
PAGE 2
Probes and Adapters The Scopix® portable oscilloscopes use patented which benefit from active safety.
PAGE 3
PROBIX VOLTAGE MEASUREMENT HX0030A LED for lighting the work area 1/10 voltage probe The HX0030A probe allows you to read the measurements directly by means of automatic scaling and choice of the measurement unit (no adjustments on the SCOPIX analyser-oscilloscope). It is equipped with 2 configurable buttons for remote control of a SCOPIX.
PAGE 4
PROBIX Current measurement HX0034 HX0072 HX0073 0.02 A to 60 A RMS or 80 A DC 5 A to 3,000 A RMS 1 A to 300 A RMS Bandwidth 500 kHz at -1 dB • 1 MHz at -3 dB 10 Hz to 200 kHz 10 Hz to 3 MHz Accuracy 1.5 % ± 2 mA (< 45 A peak) 1 % ± 0.5 A 1 % ± 70 mA Clamping diameter 20 mm 240 mm 35 mm Cable length 1.2 m 2m 2m Rise time 350 ns 1.5 µs < 110 ns Model Measurement range ± 1° 1.3° max (1° typ.) 1.3° max (1° typical.) 600 V Cat. II • 300 V Cat. III 1,000 V Cat. III • 600 V Cat.