User's Guide

Windges. (75): 2.2 m/s
Temperatur 2m: 20.6 Grad C
Rel. Feuchte : 49.0 %
Taupunkt : 9.5 Grad C
Temperatur5cm: 20.5 Grad C
Luftdruck (a):1009.6 hPa
Niederschlag : 0.0 mm
Nied.-Melder :0
Gl-Strahlung : 99 W/qm
Sonne ja/nein:1
Sonnen.-Dauer: 500.5 min/d
Temperatur(w): 24.7 Grad C
Batteriesp. :13.4 V
Luefterstrom :125 mA
Heizungsstrom: 0.0 A
SYNOP 1min : 0 SYNOP
Niedersch.LNM: 0.0 mm
ENDE
: thi direct
Type <CTRL-X> to exit
OK
Jun 3 2013
OK
3.15
Note: In the examples above, the user input is not visible, as nor the Thies logger, neither the Davis console
echo the user input. In the first example the command <ctrl-B>mm<ctrl-C> was sent to a Thies DL16
logger, while in the second example the commands VER and NVER were sent to a Davis Vantage Pro
console.
4.4. Communication Commands
4.4.1. net
Description
Used to show the network status, download files or initiate a session to
communicate with the M2M Gateway.
Usage
net [ -h ] to show the current network status; use the -h option to show the
command usage.
net get <url> <path> to download a file from <url> and save it on the local file
system to <path> (see below).
net { up | down | session } are subcommands and are described below.
Remark
The net subcommands are not available over telnet.
Examples
: net
Network status: down, ssl disabled
: net up
: net
Network status: up, ssl enabled
IP address: 10.96.184.76
DNS1: 213.33.99.70
DNS2: 80.120.17.70
4.4.2. net get
Description
Used to download a file from a http server and save it on the local file system.
29