Operating instructions

80 10/04/2015
Electronic mobile POCLAIN HYDRAULICS
4-PIN DIN72585 IP6K9K CONNECTOR
Commercial name KIT-CONNECT-4-PIN-DIN72585
Part number B02394B
Compatibility Pressure sensor IP6K9K
Temperature sensor IP6K9K
Features
Manufacturer Tyco
Components
1 DIN connector socket4 1-967325-1
1 Cap 90
° NW8.5 965577-1
4 Socket contacts 962981-1
4 Single wire seals 828920-1
2 Cavity plugs 828922-1
Wire section 0.5 to 1mm²
Insulation diameter 1.2 to 2.1 mm [0.05 to 0.11 in]
Operating temperature -40°C to +130°C [-40°F to 257°F]
Ingress protection IP6K9K
Mounting tool
toCrimp tool :AMP 734289-1
Connector mounting
1. Fit a seal on each wire
2. Strip 5 mm [0.19 in] off the wires.
3. Crimp the socket contacts with the 734289-1 hand tool pliers
in position 2 for wire range 0.5 to 1mm², pinching the seal with the lug.
4. Plug the terminal into its compartment. If a terminal is wrongly
inserted, use extraction tool AMP Ref. 1-1579007-8 to remove it.