Operating instructions

10/04/2015 75
POCLAIN HYDRAULICS Electronic mobile
Electronic control unitsElectronic componentsConnectorsCables Displays
EN 175301 - 803 STYLE A CONNECTOR WITH DIODE
Commercial name CONNECTOR-GDML-DIODE
Part number A37605A
Compatibility On/Off control electro-valve.
Features
Manufacturer Hirschmann
Standard EN 175301 - 803 style A (DIN43650)
Components 1 connector GDML 2011 LED 24 HH YE with screw + 1 seal GDM 3-7
Max. current 8 A
Max. voltage 24 V DC (use 12 V and 24 V DC)
Wire section max. 1.5 mm
2
Cable diameter 4.5 to 11 mm
Operating temperature -40°C to +90°C [-40°F to +194°F]
Ingress Protection IP65
Connector mounting
1. Unscrew the packing gland and the screw.
2. Open the connector with a flat-headed screwdriver inserted in part
B of the slot.
Strip the wire over a length of 5 mm [0.19 in].
Pass the wire through the gland, then through the cover A.
Plug the wire into B. Wire No.3 has to be earthed.
3. Re-assemble B and A: The "3" mark has to be nearest the gland.
Refit the packing gland and the screw.
You should respect the polarity as shown in the diagram below.
(+)
(-)
(+1)
(-2)
Yellow