Operating instructions

74 10/04/2015
Electronic mobile POCLAIN HYDRAULICS
EN 175301 - 803 STYLE A CONNECTOR
Commercial name KIT CONNECT CDE SA
Part number 007142211X
Compatibility Proportional control electro-valve.
Electro-valve solenoid control.
Features
Manufacturer Hirschmann
Standard EN 175301 - 803 style A (DIN43650)
Components 2 connectors GDM 2011 with 2 screws and 2 seals GDM-3-17
Max. currrent 16 A
Max. voltage 250 V (AV)
Wire section max. 1.5 mm
2
Cable diameter 6 mm [0.24 in] to 9 mm [0.35 in]
Operating temperature -40°C to +125°C [-40°F to +257°F]
Ingress Protection IP65
Connector mounting
1. Unscrew the packing gland and the screw.
2. Open the connector with a flat-headed screwdriver inserted in part B of
the slot.
Strip the wire over a length of 5 mm [0.19 in].
Pass the wire through the gland, then through the cover A.
Plug the wire into B. Wire No.3 has to be earthed.
3. Re-assemble B and A: The "3" mark has to be nearest the gland.
Refit the packing gland and the screw.
Layout
Red seal
Screw M3
Cable gland
(PG11)