Operating instructions

10/04/2015 61
POCLAIN HYDRAULICS Electronic mobile
Electronic control unitsElectronic componentsConnectorsCables Displays
SMARTDRIVE™COMMUNICATION CONNECTOR
Commercial name COM SD LT CONNECTOR KIT
Part number A49773B
Compatibility
SmartDrive Easy Plus, SmartDrive Auto, SmartDrive Premier,
SmartDrive Master, SmartDrive Offroad
Features
Manufacturer AMPHENOL
Componants
Bayonet connector
14 pins
PT06A12-14SPG023F620
Cable diameter 3.5 - 8 mm [0.14 - 0.31 in]
Wire section 0,38 mm
2
to 0,93 mm
2
[to0.0005 in
2
to 0.001 in
2
]
Operating temperature -55°C to 125°C [-67°F to 257°F]
Material Aluminium
Connector mounting
Connector wires designation
1. Unscrew the connector sub-assemblies.
Passthe cable through the securing elements.
E: CANL
F: CANL
2. Strip the wires to a length of 5 mm [0.19 in].
Solder the wires onto the pins as shown in the next table.
K: CANH_120
M: CANH
N: CANH
3. Remount the connector by screwing the securing elements to one
another.
P: GND
R: GND
A 120 ohm bus termination resistor can be
activated in linking up K and E, or K and F.
Layout
60 [2.36]
25,4 [0.99]