Operating instructions

42 10/04/2015
Electronic mobile POCLAIN HYDRAULICS
Layout Sensor with cable Sensor with connector
Installation of the digital steering sensor
The steering sensor must be secured (with the 2 screws supplied) on a rigid sheet at least 2 mm thick.
Example of mounting
N.m [lb.ft] ± 10 %
30 [22.1]
The steering sensor must be secured (with the 2 screws supplied) on a rigid sheet at least 2 mm thick.
Example of mounting
Pin Color Description
1BrownSupply
4 Black Signal
3 Blue Ground
Electrical connection 90° 180°
Commercial name ELEC-CABLE-M12-90°-5000 ELEC-CABLE-M12-180°-5000
Part No. A04999J A07468S
page 94 page 94
When wiring, check that the wire can neither be cut off, nor torn off when the machine is
working or moving.
Delivered with 2 nuts, 4 mm (not fitted)
Delivered with 2 nuts, 4 mm (not fitted)
Lock-nut
Nut
Wheel
Cylinder
Disc detected
L = 2m (3 wires x 0.34mm²)