Operating instructions

32 10/04/2015
Electronic mobile POCLAIN HYDRAULICS
Layout G1/4 sensor
Installation
For transmissions controlled by SmartDrive™ Easy Plus, Master and Premier System electronic control systems, the sensor is
fitted on the charge pressure circuit.
For other applications, please consult your Poclain Hydraulics applications engineer.
Hydraulic connection
Nut O’ring
N.m [lb.ft] ± 10 %
G 1/4" FMP 30 [22]
Observe the torques indicated.
Electrical connection Commercial name Part number
Cable for pressure sensor connection CABLE-PRESSURE-SENSOR-3M 003141105U page 93
When wiring, check that the wire can neither be cut off, nor torn off when the machine is
working or moving.
A: Ground
B: 5 Vcc
C: Signal 0.5 to 4.5 V
Connector side viewSensor side view