Operating instructions

28 10/04/2015
Electronic mobile POCLAIN HYDRAULICS
Installation
Mechanical fitting
The steering sensor must be fitted onto a rigid plate at least 2 mm [0.08"] thick.
If this sensor is used with a SmartDrive™Off Road or Premier transmission system, it must be linked with a rod to the steering
column or pivot. On four-wheel steering machines, a second steering sensor will be necessary.
Ref. Quantity Class
N.m [lb.ft] ± 10 %
(as per standard DIN 912)
M 6 2 8.8 10 [7.37]
Example of mounting:
Sensor electrical signal control
Electrical wiring
2 cables provided with the potentiometer :
Sensor wire
ID
Function
1cable with Weather Pack connector
A Ground
B Signal
C Supply
1 cable with Metri Pack connector
A Supply
B Signal
C Ground
At rest, the tension signal is min.
For connector wiring, please refer to the cable table and to the general wiring diagram in the installation documentation for your
transmission system.
When wiring, check that the wire can neither be cut off, nor torn off when the machine is
working or moving.
Electrical connection
Commercial name KIT CONNECTEUR CAPT CDE SA
3-pin WeatherPack page 71
Part number 007142212Z
Commercial name KIT CONNECTEUR CAPT VIRAGE
3-pin MetriPack page 72
Part number 007142222K
Commercial name KIT-CONNECT-6-PIN-MP
6-pin MetriPack page 73
Part number A38140G
1
Difference min. 1V
Left direction
Straight
Right direction
Difference min. 1V
>0.4V <4.6V3.6V1.4V