User`s guide

9-5
Figure 9-7
Installing the Quad-Band Antenna
Remove the paper backing from the adhesive strip on the back of the antenna. Position
the antenna on the top inside wall of the enclosure just behind theTamper switch as
shown in Figure 9-7. The antenna cable must exit to the right. Apply pressure for
several seconds to ensure good adhesion.
4) Reinstall the original antenna (or the antenna cable from the quad-band antenna) by
pushing straight into the antenna connector on the g20 radio until a “click” is heard.
Install the SIM card observing that the notch is facing out as shown in Figure 9-8.