User`s guide

6-5
“Inputs” are generally not used in electric meter applications, but there is one parameter
that must be set correctly, otherwise the call may be rejected. Select any one of the 4
input lines and double-click it. The screen shown in Figure 6-6 will appear.
Figure 6-5
Input Description Screen
6.2.5 Interval Size
When the DCM-200 is configured using MP32 (Chapter-5), a Time Interval Size had to
be specified. This value is reported to the DC-2000 data collection software, and DC-
2000 will compare it to a value that it has in its database. If the two do not match, the
call will be rejected. Therefore it is recommended that both values (here and in the
DCM-200) be set to 60 minutes.