Operation Manual

MI 3121H Smartec 2,5 kV Insulation / Continuity Settings

The default setup is listed below:

Instrument setting Default value

Function

Sub-function

Parameters / limit value

Insulated resistance No limit, Utest = 500 V

Continuity RLOW

RLOW No limit

CONT No limit

Note:

 Initial settings (reset of the instrument) can be recalled also if the TAB key is

pressed while the instrument is switched on.

4.2.2 Date and time

Selecting this option will allow the user to set the

date and time of the unit.

Figure 4.3: Setting date and time

Keys:

TAB

Selects the field to be changed.

UP / DOWN Modifies selected field.

TEST

Confirms new setup and exits.

Function selector

Exits back to main function menu.

Indications:

Set day.

Set month.

Set year.

Set hour.

Set minute.

Warning:

 If the batteries are removed for more than 1 minute, the set time will be lost.