Operation Manual

MI 3121H Smartec 2,5 kV Insulation / Continuity Display organization
15
Numeric readout of measurement result
Measurement result is inside pre-set limits (PASS).
Measurement result is out of pre-set limits (FAIL).
Analog presentation of measured result.
3.4.3 Message field
In the message field, different warnings and messages are displayed.
Warning! Read the User Manual with special care!
Warning! Dangerous voltage is applied to the test terminals.
Measurement is implemented.
CAL
Test leads resistance in CONTINUITY tests is compensated.
LIM
Indicates that limit value can be set.
MEM
Offers storing of measurement result.
RCL
Indicates that recall memory is active.
LOC
Indicates location number in installation structure.
OBJ
Indicates object number in installation structure.
PI
Indicates Polarization Index result in the Insulation function.
DAR
Indicates Dielectric Absorption Ratio result in the Insulation function.
3.4.4 Auxiliary monitor
The monitor shows additional result, test parameter or message.