TE-7VS-4 User Manual iBeamUSA.com MetraDealer.com techsupport@metra-autosound.
7" QUAD MONITOR 1. 2. 3. 4. 5. 6. 7. CH 2 8. Power 9. CH 3 10. CH 4 11. Mode switch 12.
SPECIFCATIONS REMOTE CONTROL 2
CONNECTION TURNING AV 1 AV 2 AV 3 AV 4 3
Monitor Bracket Installation 1. Remove the screw from monitor then take out the monitor. Place U type bracket in the installation location and mount with 3 screws.(see below pictures) 2. After screwing bracket in place, put the monitor into the bracket,adjust angle and lock it in place with thumb screws. (see below pictures) 3. Finish installation. The adjustable angle is forward 30 ° and (see below pictures) 4 backward 30 °.
Accessory 1.Remote control*1 PCS 2.User manual*1 PCS � Power cable 1 PCS � n r <·., 4.Sun shade*1 PCS 5. Bracket Accessories*1 PCS r Announcements For your safety, please do not watch video or operate the monitor when driving. If the device stops working please do not dismantle the product and consult customer service. Warning: Please install this device in accordance with laws and regulations. We take no responsibility for any illegal product installation.
Notes: _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _________________________
IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
