User Manual

Notes: Images for instruction use only, your unit may look different but use the same methods.
3. Adjusting the Antenna:
The NVR antenna transmits signals to the surroundings. When the NVR and the IPC antenna are at the
same height and parallel to each other, the effect is best. If the NVR can not be the same height, the IPC
antenna should be tangent to the sphere with the center of the NVR (Figure 1, Figure2- 2). Don’t let the
antenna point directly toward the NVR (Figure 2-1), according to the figure can be placed correctly.
Wireless IPC
Multiple display
monitoring equipment
HDMI/VGA
Wireless NVR
Internet
Wi-Fi
Remote access
2. Make sure wireless NVR Kit is working properly.
Connect NVR to monitor, all devices powered on, no settings to adjust as this is set to auto-pair.
When all of the IPC (IP Camera) videos appear on the display, the device is working properly and
can be installed in the next step.
Notes: Please make sure the NVR video output and monitor input have been connected. Please
only use the included power supply in the package to prevent damaging the NVR or IPC's.