User Manual

Wireless NVR Kits Quick Installation Guide
This wireless NVR Kit has easy installation, plug and play, wireless communication uses automatic
passwords generation mechanism to ensure that the monitored video can not be intercepted under
the default passwords.
1. Install HDD.
Make sure all power is disconnected before installing. Installation tool: Phillips screwdriver.
Notes: Please use surveillance grade hard disk drive only to avoid poor drive performance.
Notes: Images for instruction use only, your unit may look different but use the same methods.
Products Appearance Description
LAN、Audio Output、VGA、HDMI、Power input port、Antenna.
Antenna
LAN
Power input port
HD
Audio Output VGA
（1）Unscrew the screws on the back and sides of
the chassis and remove the cover.
（3）Align the hard disk screw holes to the
chassis backplane, and then tighten the screws.
（4）Install the cover and re-attach with screws.
（2）Connect one end of the hard disk power cable
and SATA data cable to the motherboard and the other
end to the hard disk.