Owner's Manual

Products Appearance Description
NVR Ports: HDMI port, VGA video output port, Audio output port, Ethernet port, USB port, PoE LAN
ports, Power Input port.
IP camera Ports: Ethernet Port, Power input port.
Power input
Ethernet port
Note: Images for instruction use only, your unit may look different but use the same methods.
PoE NVR Kits Quick Installation Guide
This PoE NVR Kits can be easily installed, plug and play and no complex set up needed.
PoE IP cameras are powered on by network cable connected to PoE ports.
1. Install upgraded HDD.
Make sure all power is disconnected before installing. Installation tool: Philips screwdriver.
Notes: Please use surveillance grade hard disk drive only to avoid poor drive performance.
（1）Unscrew the screws on the back and sides of
the chassis and remove the cover.
（3）Align the hard disk screw holes to the
chassis backplane, and then tighten the screws.
（4）Install the cover and re-attach with screws.
（2）Connect one end of the hard disk power cable
and SATA data cable to the motherboard and the other
end to the hard disk.
VGA Video output interface
Ethernet port
With PoE function network interface
Power input
Audio output USB 2.0 port
HDMI video output interface
POWERNET
LAN1
LAN2
LAN3
LAN4
LAN5
LAN6
LAN7
LAN8
USBVGAA-OUT