Owner's Manual

Wireless NV R kit Qui ck in sta ll at io n guide
I> Software operation
1 Add camera by matching code
Steps:
Right click on the mouse to open menu options.
- Click Video Manage to enter Video Management interface.
There are two ways for the NVR to add IPC, "Code Add" and "Auto Add ". When
adding cameras by matching code, the camera transmits video images wirelessly to
NVR, IP is 172.20.14.X;
When Auto Adding the camera, the camera transmits the video images via the
Ethernet cable to the NVR;
NOTE: The cameras have been matched by the factory, no need to add other
cameras. If you need to do a Match Code, first, take your Ethernet cable and connect
to the camera and then connect to the NVR. Then follow steps above.
2 Video Playback
Step 1: Right click on mouse.
Step 2: Click Video Playback
Step 3: Choose channel number, choose record mode.
Step 4: In Search Time, input your start time and ending time.
Step 5: Click playback to start.
Tips: Playback icon introduction: ID playback 1 frame previous Cl playback l frame
next C play m pause m fast forward x2 , x4 , x8
06