Owner's Manual
Step: After setup, right click interface, and it will remind to save the settings, click
"Yes" and save.
Warm prompt: After setup please remember to click "save
",
otherwise it won't work.
Saving
Channel
Configuration.
Are You
Sure
To
Continue?
No
9 Confirm setup result
Step: After channel setup,right click main interface-wideo management-->added device, if
the position
of
newly setup channel has changed, that means the setup works.
Step 1: Fast
Networking-check
the IP address
of
the device.
Step 2: Access the computer
in
same LAN, input video recorder's IP address and port(if port
is 80, no need to input) in Internet Explorer browser or any other browser.
Then it will access
in
LAN log
in
web page, input user name and password, click log
in
.
- =
-
Step 3: Once access successfully, you can get the video.
Tips: Please make sure video recorder and computer are
in
the same network segment.