Owner's Manual
A
""'l
.t4d•U•IWt4•II-.
___________________
_
Record video is very easy on camera system.
Time Recording: Setup period
of
time
of
recording on NVR GUI. Right click mouse
->System Setup->Record Setup->Record Plan. Click "Time" and put mouse icon on the
upper left corner (for example
"1
" as picutre shows), press and drag the mouse to the right
to choose the time. The list will turn to red.
Motion Recording: Only detect motion and then start recording. Right click mouse
->System Setup->Record Setup->Record Plan. Click "Motion" and put mouse icon on the
upper left corner (for example "1" as picutre shows), press and drag the mouse to the right
to choose the time. The list will turn to green.
Alarm Recording: Right click mouse->System Setup->Record Setup->Record Plan. Click
"Alarm" and put mouse icon on the upper left corner (for example "1" as picutre shows),
press and drag the mouse to the right to choose the time. The list will turn to yellow.
Note: Users can setup any period
of
time they want, for example 0:00:00-23:59:59, That's 24
hours*? days recording. When NVR detects hard disk, the default setting will be 24 hours*?
days recording.
Steps: Right click mouse
in
main menu->Video playback->choose date, channel, record
mode->click Search->then can view playback file.
Warm prompt:
1.illustration for playback button:
ICI
rewind,
IC)
playback previous seconds:
C)
playback following seconds,
l]
play,
m pause:
!Jl
fast forward x2,x4,x8
2.play file:Choose the recording file
in
file list, as number "1" shown
in
picture. Choose one
of
the recording, click "play" to play to recording file;
3.video backup: Choose the recording file
in
file list, as number "1" shown
in
picture. Insert
the U flash disk, click "video backup" to backup the file;
4.timeline: click "date" and "time" at left bottom to check the timeline
of
recording, show
number "2" shown in picture;
5.on the timeline with recording file, left click the mouse, then can playback the file.