Owner's Manual

Step 1: Click 【Scan】 to scan all nearby WiFi ;

Step 2: Check the camera to connect WiFi hotspot, in the following 【Key】

enter the WiFi key;

Step 3: Select 【Encryption】type;

Step 4：Check whether or not DHCP is enabled;

Step 5: Click 【Save】to complete the configuration. The status shows "The

connection is successful".

PC connection

2. Connect to login

2.3 Configure the network

1 Click 【Configure】to enter the configuration interface, select

【Network】→ 【Advance Setup】→ 【Wifi】to enter the camera WiFi

configuration interface start connecting WiFi hotspot.

interface, start connecting WiFi hotspot.

866•839•9187

rev. 7/10/2018