Owner's Manual

WAN / LAN

PC connection

1. Prepare for connection

1.2 Ping IP address of IP camera

1 Connect the IP camera and PC to the same Local Area Network

with a network cable. Turn on the power supply. The method of

connection is as the following picture:

2 Left click【Start】(or use shortcut key “win button+R” )→input

“cmd”→

press “Enter” button of keyboard to pop up the command

prompt window→input “Ping***.***.***.***” and then press the Enter key to

check the system statistic connection information(For example, the IP

address of IP camera is 192.168.1.168，please input ”ping 192.168.1.168”).

Ping statistics like these means that the signal communication of the PC

and IP camera is normal, your IP camera works normally (Refer to Fig

1-06).

Packets: Sent = 4, Received = 4, Lost = 0 <0% loss>