Instructions

386-257-2956
www.MetraOnline.com
460 Walker Street, Holly Hill, FL 32117
Replacement Headlight with Halo and Turn Signal
The headlight replacements come with a H4
connector. This connector contains, both high and
low beam connections, and a common ground.
To use the DRL function, connect the DRL wire to a
switched +12V source, such as an accessory or
ignition circuit. The DRL halo will illuminate when this
circuit is activated. Connect the Turn Signal wire to
the +12V source for the turn signal light for that side
of the vehicle.
1/21