User Manual

10
LED Indicators
“G” or Ground
ON: PDU is grounded properly
OFF: PDU is not grounded
“P” or Power
BLUE: Good / Protected and Clean power
RED: Bad / No Protection
“N” or Network
BLINKING RED: No Network Connection
SOLID BLUE: Good Network Connection
RAPID BLINKING RED: PDU failure requires reboot or reset
Outlet Status
ON: Outlet is On
OFF: Outlet is Off
“VOL” or
Safe Voltage
SOLID BLUE: Normal/Good Voltage
SOLID RED: Over/Under Voltage
Loop Out
ON: Outlet is On
OFF: Outlet is Off
S1 Surge Module
ON: Good / Protected
OFF: Bad / No Protection