CAL Ra ck Mount POWER DISTRIBUTION UNI T PR-V7PI LOOP OUT 6 Intelligent VERTI 1
Introduction Thank you for purchasing the PR-V7PI. Your new Power Distribution Unit (PDU) by Big Dog Power provides filtered AC power to your equipment. 6 individually controlled outlets provide up to 2040 Joules of surge Protection. Wi-Fi and Wired LAN connections allow for flexibility with placement and network connectivity. The built in SelfHealing functions of the PR-V7PI will keep your network connected equipment going by automatically resetting the power going to the outlet.
Features • 6 individually controlled outlets • 1 always on Loop Out outlet: Gives the ability to expand with additional PR-V7PI to match your needs • Surge Mileage: Track when a Surge Event happens and the remaining health of the surge protection • Replaceable surge modules • Rack Mountable 1U or vertical • 2040 Joule surge protection • Additional mounting holes on the ends and along the side allows for additional mounting orientations • Web and Mobile app for remote management and notification • Self
Big Dog Power™ by Metra Home Theatre, LLC Limited Product Warranty and Connected Equipment Limited Warranty Valid in the United States and Canada THIS WARRANTY DEFINES ETHEREAL HOME THEATRE. LLC’S LIABILITY FOR ANY AND ALL DAMAGES RESULTING FROM THE OPERATION OR FAILURE OF THE PRODUCT. THE WARRANTY PROVIDED IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, METRA DISCLAIMS ANY AND ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED.
Limited Product Warranty: HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, PROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH THE PRODUCT. FURTHER, TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW, Ethereal Home Theatre, LLC HEREBY EXPLICITLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Conditions and Limitations: Excluded Items: Proof of purchase is required. This warranty does not apply to: (1) consumable items, such as a replaceable surge protection module, (2) cosmetic damage such as scratches, dents, broken plastic parts, and discoloration (unless same is the result of a defect in materials or workmanship), (3) damage resulting from the failure of another product, (4) damage caused by misuse or abuse, or (5) damage caused by unauthorized service of the product.
Connected Equipment Limited Warranty: Ethereal Home Theatre, LLC warrants to the original purchaser of this surge suppressor that it will at its option, pay the fair market value of, repair, or replace, any home entertainment equipment which is damaged by a transient surge while properly connected through the Ethereal Home Theatre, LLC surge suppressor to a properly wired and grounded AC power line. The Ethereal Home Theatre, LLC surge suppressor must have been designed for the particular application.
Anatomy A. Wi-Fi Antenna B. Ethernet Port C. At a glance status LEDs See LED functions for more information D. Individually controlled outlets E. Replaceable Surge Module S1 – 2040 Joule Rating F. Grounding pin G. 1U Horizontal Rack Ears H. UPS Link For future use I. USB Power Supply 2.4 amp 5V J. Recessed Reset button Hold button for 10 seconds to perform factory restore 8 K. Configurable Power Button L. Outlet Status LEDs See LED functions for more information M.
A B C E D H I J K F L M N O Front P Q Back G 9
LED Indicators “G” or Ground “P” or Power “N” or Network ON: PDU is grounded properly OFF: PDU is not grounded BLUE: Good / Protected and Clean power RED: Bad / No Protection BLINKING RED: No Network Connection SOLID BLUE: Good Network Connection RAPID BLINKING RED: PDU failure requires reboot or reset Outlet Status ON: Outlet is On OFF: Outlet is Off “VOL” or Safe Voltage SOLID BLUE: Normal/Good Voltage SOLID RED: Over/Under Voltage Loop Out ON: Outlet is On OFF: Outlet is Off S1 Surge Module ON:
Installation Rack Mount 1U Horizontal 1. Use the included screws to attach the Rack Mount ears to the PDU near the face of the PDU 2. Slide the PDU into the rack where you intend to mount it 3.
Installation Rack Mount Vertical with Clips 1. Use the included bolt and nuts and secure the included clip to the rack at appropriate lengths apart No further than the length of the PDU (44cm, 17.32in) Ensure that the clips are aligned together 2.
Installation Surface Mount 1. Use the included screws to attach the included Rack Mount ears to PDU Additional Mounting holes can be found at either end and along the side of the PDU 2.
Connections and Use Physical Connections 1. Screw in the Wi-Fi Antenna 2. Plug in all to be used connections Including: Ethernet LAN (Skip the Ethernet cable if you will be using Wi-Fi) Connected equipment power cables 3. Insert the female end of the included 6ft power cord into the PR-V7PI 4. Plug in the Male end of the included 6ft power cord into the main outlet on your wall 14 Wi-Fi Setup If using the Wi-Fi connection, follow these instructions 1.
6. Click “SCAN NETWORKS” The network mode can also be changed before scanning. For ease of setup we’ll use the default DHCP settings. 7. Select the desired network SSID NOTE: the PDU requires a 2.4Ghz Wi-Fi connection. 8. If required enter the password for the Wi-Fi connection 9. Click “Save” The PDU will now connect and reboot. After it has rebooted it will attempt to connect to the Wi-Fi signal. 10.
Cloud setup 1. 2. 3. 4. Log in to your MAVbase.com account Click the Add New button Click “ADD PDU” Add the PR-V7PI to your account using the MAC address of the PDU Surge Protection Protected Circuit(s) Replaceable 2040 Total Joule Protection from the Line to Neutral to Ground circuit. For use only with SPD Modules specified by the manufacturer. This SPD is suitable for use only with manufacturer’s specified Cat. No. PR-RMS1 16 replaceable SPD Module.
Important Safety Instructions Read and observe the following safety points at all times. Notice For indoor use only. Internal components are not sealed from the environment. The device can only be used in a fixed location such as a telecommunication center, or a dedicated computer room. When you install the device, ensure that the protective earthing connection of the socket-outlet is verified by a skilled person.
Do not use the device in a confined, poorlyventilated location; this can overheat the unit, possibly even causing a fire. If used in a small space other than an EIA-standard rack, ensure that there is adequate space around the device. Proper Cleaning In general, the only cleaning necessary for is a light dusting. Unplug the PDU from the wall outlet before cleaning it. Do not use liquid or aerosol cleaners.
Power cord safety FCC Warning Do not place the power cord near areas with heavy foot traffic (for example, hallways). Do not create a trip hazard with the power cord. If the power cord’s protective jacket rips or frays, exposing the internal wiring or shielding, disconnect it from the power source and replace the power cord immediately. See the warranty section of the owner’s manual for details.
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
FCC Part15C+RSS247 To assure continued FCC compliance: 1. Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. 2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IC IC French: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
UL Safety: © Copyright 2022 Ethereal Home Theater, LLC. • Type 1, Operating Control An online purchase registration is available at www.metraav.com. Registering your surge protector at the time of purchase can make the process a lot easier if you ever need to file a claim.
INTELLIGENT Specifications: POWER Operating Temperature: We’ve combined all of the features integrators need into one unique power distribution unit to deliver surge protection, remote control, smart home integration and more. The 6 individually controllable outlets have power metering, self-healing and automatic reboot capabilities for smarter remote management of your connected devices.
