User Manual

8
LED Indicators
“G” or Ground
ON: PDU is grounded properly
OFF: PDU is not grounded
“P” or Power
BLUE: Good / Protected and Clean power
RED: Bad / No Protection
“N” or Network
BLINKING RED: No Network Connection
SOLID BLUE: Good Network Connection
RAPID BLINKING RED: PDU failure requires reboot or reset
Outlet Status
ON: Outlet is On
OFF: Outlet is Off
Voltage
SOLID BLUE: Normal / Good Voltage
SOLID RED: Over / Under Voltage
Always On
ON: Outlet is On
OFF: Outlet is Off
Surge Module
S1 and S2 LED
ON: Good / Protected
OFF: Bad / Not Protected