Installation Instructions

6
STAND-ALONE BLUETOOTH DIAGRAM
Do Not Connect
Any remaining wires
tape off and disregard
Blue/White - Amp Turn-On Wire
INPUT 5
INPUT 6
Black - Chassis Ground
Yellow - Battery Power
Red - Accessory Power
An SPDT relay, Metra part number
E-123, must be used if more than
one amplifier will be installed
5
5
4
3
2
1
RCA Jacks
(sold separately)
Black - Chassis Ground
Orange - Control Wire
Black - Chassis Ground
Brown - Control Wire
Master Volume Knob
Sub Control
Volume Control
Interface w/ BT board
Bass Knob