Installation Instructions

KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
MetraPowerSports.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 9/24/20 INSTMPS-DPSL-BT
INSTALLATION INSTRUCTIONS
MPS-DPSL-BT
Having difficulties? We’re here to help.
Contact our Tech Support line at:
1-800-253-TECH
Or via email at:
[e-mail]
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 7:00 PM
Sunday: 10:00 AM - 4:00 PM
Input Impedance 1M Ohm
Input Channels 4
Input Options High-level or Low-level selectable
Input Type Differential-Balanced
Input Voltage
High Level Range
0 - 28-volts (peak-to-peak)
Input Voltage
Low Level Range
0 - 4.9-volts (peak-to-peak)
Ouput Channels 6
Output Voltage Up to 5-volts RMS
Output Impedance 50 Ohms
Equalizer Type 15 Band Graphic EQ, +/- 10dB
THD <0.03%
Frequency Response 20Hz - 20kHz
Crossover 2-Way low-pass (sub), high pass
(front & rear)
Crossover Type Linkwitz-Riley Selectable
Sampling 48kHz
S/N Ratio 105dB @ 5-volts RMS
Operating Voltage 10-16-volts DC
Standby Current Draw 7mA
Operation Current Draw 150mA
Adjustments/Controls Application via Bluetooth
Remote Output 12-volts DC (signal sense or
with ignition)