Installation Instructions

ManualsBrandsMetra ManualsAudioMetra JL/JT Wrangler Gladiator Soundbar Speaker Adapter and Harness

1

2

3

4

5

6

7

REV. 10/05/2020 INSTJP-1015

3

Figure A

Figure B

TEMPLATE CUTTING

1. Remove the screws holding the grill in place.

2. Remove the speakers from the soundbar.

3. Carefully hide the harness in the soundbar

as to not cut the wiring while cutting the

interior structure of the soundbar.

4. Place the template in place and secure with

the provided (9) screws. (Figure A)

5. Trace the area highlighted in Figure B and

remove template, this will be the area that

needs to be cut.

NOTE: Only trace and cut the smaller circle if

a tweeter is being used.