Instruction Manual

HeiseLED.com
Technical Support: 386-257-1187
HE-BRK-FD4
Install instructions
10
-Harness hardwire
1. Open the hood and connect the
harness as shown below.
a. Ground the single black wire
from the harness marked
“chassis ground” to a factory
grounding point in the engine
bay.
b. A switch, fuse holder, and relay
will be need for each “set” wire
(brown, blue/orange, & yellow/
orange). (Figure 23)
2. Continue with harness routing,
page 5.
Figure 23