Owner's Manual
£•
et
h e r e a 1·
Installation
of
the
HDM-AlO2 is very simple
with
only a couple
of
required connections.
1. Connect source side
to
the
"In"
HDMI terminal.
2.
Connect display side
to
the
"Out"
HDMI terminal.
3.
Connect
the
included Power Supply
4.
Here is
the
tricky part, connect
the
HDM-AIO2 phoenix plug
to
a normally closed relay on
your
control system*
or
a
to
normally closed/momentary contact switch.
5.
If
using a control system program a "Relay Open" command
into
each Source Selection Macro.
*If
you
do
not
have a control system
our
CS-IRKITCCUS
is an excellent choice.
That is
it,
you are done.
For more information and
an
installation video please go
to:
www.metrahometheat'.er.com and select
the
Helpful
Videos tab.
For the most reliable and highest quality performance cables look
for
the
DPL
Seal
of
Approval. For more information
DPL
approved cable products, please visit www.dpllabs.com
One Year Limited Warranty
This warranty includes parts and labor repairs on all components found
to
be defective in material
or
workmanship
under normal conditions
of
use. This warranty shall
not
apply
to
products which have been abused, modified
or
disassembled. Products
to
be repaired under this warranty must be returned
to
Spectrum Electronic Solutions
with
prior
notification and an
assigned
return authorization
number
(RA).
460 Walker Street * Holly Hill,
Fl
32117-2653
866-839-9187
www.metrahometheater.com