User Manual

ManualsBrandsMetra ManualsAutomotiveAxxess GMOS-09 OnStar Interface for Amplified GM Vehicles with "Door-n-Lock" Style Harness

Installation instructions for part GMOS-09

REV. 3/21/2017 INSTGMOS-09

axxessinterfaces.com

•

metraonline.com

Axxess Integrate

CAUTION!

All accessories, switches, climate controls panels, and

especially air bag indicator lights must be connected before cycling

the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

•

Provides accessory power (12-volt 10-amp)

• Retains R.A.P. (retained accessory power)

• Provides NAV outputs (parking brake,

reverse, speed sense)

• Retains chimes

• Retains OnStar / OE Bluetooth

• Adjustable OnStar level

• Designed for amplified models

• Retains balance and fade

• USB-CAB (sold separately) updatable

INTERFACE FEATURES

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell caps, etc.)

• Small flat-blade screwdriver

TOOLS REQUIRED

GMOS-09

GM Data Interface

2001-2005

• GMOS-09 interface • GMOS-09 harness

• 16-pin harness with stripped leads

INTERFACE COMPONENTS

Connections to be made .........................................2

Installing the GMOS-09 ..........................................3

Initializing the GMOS-09.........................................3

Adjusting the GMOS-09 ..........................................3

Table of Contents

APPLICATIONS

OLDSMOBILE

Aurora 2001-2003

PONTIAC

Bonneville 2000-2005

Summary of content (8 pages)

PAGE 1
® Installation instructions for part GMOS-09 GMOS-09 GM Data Interface 2001-2005 Table of Contents Connections to be made..........................................2 Installing the GMOS-09...........................................3 Initializing the GMOS-09.........................................3 Adjusting the GMOS-09...........................................3 INTERFACE FEATURES REV. 3/21/2017 INSTGMOS-09 • Provides accessory power (12-volt 10-amp) • Retains R.A.P.
PAGE 2
® GMOS-09 Connections to be made From the 16-pin harness with stripped leads to the aftermarket radio: The following (3) wires are only for multimedia/navigation radios that require these wires. • Connect the Red wire to the accessory wire. • Connect the Blue/Pink wire to the VSS/speed sense wire. • Connect the Blue/White wire to the amp turn on wire. This wire must be connected to hear sound from the factory amplifier. • Connect the Green/Purple wire to the reverse wire.
PAGE 3
® GMOS-09 Installing the GMOS-09 Adjusting the GMOS-09 Audio level adjustment: With the key in the off position: • With the vehicle and radio turned on, turn the volume up 3/4 of the way. • Connect the 16-pin harness with stripped leads, and the GMOS-09 harness, into the interface. • With a small flat-blade screwdriver, adjust the potentiometer clockwise to raise the audio level; counterclockwise to lower the audio level. • Connect the GMOS-09 harness to the wiring harness in the vehicle.
PAGE 4
® Installation instructions for part GMOS-09 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling. KNOWLEDGE IS POWER REV.
PAGE 5
® Instrucciones de instalación para la pieza GMOS-09 GMOS-09 Interfase de Datos GM 2001-2005 Indice Conexiones que se deben hacer.............................2 Instalación del GMOS-09.........................................3 Inicialización del GMOS-09.....................................3 Ajuste del GMOS-09.................................................3 CARACTERÍSTICAS DE LA INTERFASE REV. 3/21/2017 INSTGMOS-09 • Provee corriente de accesorios (12 voltios 10 amperes) • Retiene R.A.P.
PAGE 6
® GMOS-09 Conexiones que se deben hacer Del arnés de 16 pins con conectores pelados al radio de mercado secundario: Los siguientes (3) cables son para radios de mercado secundario con multimedios/ navegación que tienen estos cables. • Conecte el cable rojo con el cable de accesorios. • Conecte el cable azul/rosa al cable VSS o del sensor de velocidad. • Conecte el cable azul/blanco con el cable de encendido del amplificador.
PAGE 7
® GMOS-09 Instalación del GMOS-09 Ajuste del GMOS-09 Ajuste del nivel de audio: • Con el vehículo y el radio encendidos, aumente el volumen hasta 3/4 de su totalidad. • Con un pequeño destornillador de cabeza plana, ajuste el potenciómetro hacia la derecha para aumentar el nivel de audio y hacia la izquierda para disminuir el nivel de audio. • Una vez que haya llegado al nivel deseado, el ajuste del nivel de audio está completo.
PAGE 8
® Instrucciones de instalación para la pieza GMOS-09 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.