Owner's Manual

KIT ASSEMBLY
ISO DIN radio provision with pocket
1.
Attach the pocket to the radio brackets
using (4) of the supplied #8 x 3/8"
~ -
~'
Phillips screws. (Figure A)
(iii.
~ -
~
2.
Slide the radio into the bracket/pocket
(iii.
assembly and secure it using the screws
supplied with the radio. ( Figure B)
3.
Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
a,~· ·· .. .
-~
proper mating adapter from Metra
-~
and/or AXXESS.
4. Slide the radio into the sub dash and
secure it using the factory hardware.
5. Reassemble the dash in reverse order of
(Figure A) (Figure 8)
disassembly using the new 7528 radio
housing.
REV. 8/26/2021 INSTDP-7528 El