Owner's Manual

1. Secure the support bar to the top of
the radio housing using the (2) screws
removed in step 4. ( Figure A)
2. Secure the hazard switch using the
(2) #8 x 1/2" Phillips screws provided .
(Figure B)
3. Transfer the retaining clips to the
corresponding locations on the radio
housing using screws removed in step 6.
(Figure C)
II Moira >
(Fi gur e A)
( Figur e 8)
( Figu re C)
KIT PREPARATION
4. Attach the radio trlmplate to the radio
housing using (6) of the supplied
#8 x 3/8" Philips screws. (Figure D)
5. Attach the (2) panel clips to the radio
housing. (Figure E)
C ont i nue to Kit Assembly
(Fi gure D)
(Figure E)
386.257.1187 I MetraOnline.com