Quick Start Guide

DP-3021B
4
Kit Preparation
Climate control sub-dash
modification:
1. Remove the (2) 9/32” screws
securing the climate control panel
and temporarily move it out of the
way. No need to unplug it unless so
desired. (Figure A)
2. Utilizing the large screw holes,
temporarily secure the included
drill template to the sub-dash
using the factory hardware.
(Figure B)
3. Drill a 1/8” hole in the (4) small
screw holes, and then remove the
template. (Figure B)
(Figure B)
(Figure A) (Figure C)
4. Cut and remove the metal
climate control and radio support
brackets to allow clearance for the
aftermarket radio. (Figure C)
5. Utilizing the new holes drilled in
step 3, secure the climate control
panel to the sub-dash using the
(2) #8 x 1/2” Phillips truss-head
screws provided.
Continue to Kit Assembly
Remove
shaded area