Owner's Manual

What's included
Main Unit
Remote Control Adapter
Ports and Interfaces
Remo te Control
1. POWER : Power standby/power on
2. MUTE : Audio output mute on/off
3. Full Screen MODE 2; Press 1 ~ 4 button will
select the corresponding channel and
displayed in full screen as a seamless
switcher.
4. AUDIO SWITCH : press 1 ~ 4 button will
select the corresponding audio output.( In
2x2 , 1x3 and P1P Modes l
Remote Control Size :
2 x 4.8 x . 37 inches
S. MODE 1. The four HDMI input sources are
displayed ,n 2x2 on one screen .
a. Pressing the 2x2 ( EB ) button will selctt
the four video 2x2 display.
b. Pressing the lxl ( 01) button once will
select lxl left and right two video mode
and twice will select the lxl top and
bottom two video mode.
c. MODE 3: Pressing the 1x3 (Cf; button
displays the four HDMI input ~ources with
one baer and three sm.,ller windows on
one screen. In this mode, pressing the
Seamless Switch 1 ~ 4 buttons will select
the corresponding channel to the bigger
window.
d. Scaler button: pressing the Scaler button
will switch between 1080p, 1600p and
4K@)30Hz .
6 PIP MODE : Pressing the P1P (Q) button
w111 display a single large video and a smaller
video ,n the bottom right. Press the PiP (QJ
repeatedly to change the sm.,11 P1P video
location (cycle from nght lower corner >left
lower corner> left upper corner> right upper
corner of the screen) .
a MODIFY~ Press this button
when you want to change the
different input source combination of
display mode Instead of the default
view
I. Simply press the Modify[;:)
button after you have selected t he
viewing mode that you want to
change ( lxl , 1x3, 2x2, P,P) then
press the Seamless Switch 1 ~4
Seamless Switch w1th1n 5 seconds .
(See "Special Function Descnpt,on •
for more information)
b. FULL SCREEN Press to change aspect
rat,o on modes that do not fill the
entire screen . (e.g. lxl or lx3)
c. OSD : Press to show the on screen
descriptions of the content that 1s
currently showing. Will disappear 3s
later.