Owner's Manual

Operating Instructions
3
EDID Introduction:
Copy EDID: output 8 is prior port
When output 8 is connected to one display, other displays connected to other outputs
will follow the resolution of output 8.
Auto: Default 4K@60Hz.
Mixed EDID: always follow the lowest resolution of the displays connected to 8 outputs
in order to support all displays show the source.
The HDCP Version is prior to EDID, when the source is HDCP2.2,
if the TV supports HDCP2.2, it will output 4K@60Hz,
if the TV doesn’t support HDCP2.2, it will output 1080p.
please see below table:
Input source HDMI display
Support HDCP2.2
HDMI display
Doesn’t support HDCP2.2
HDCP2.2 4K@60Hz HDCP2.2 4K@60Hz HDCP1.4 1080p@60Hz
HDCP2.2 4K@24Hz HDCP2.2 4K@24Hz HDCP1.4 1080p@24Hz
HDCP1.4 4K@24Hz HDCP1.4 4K@24Hz HDCP1.4 4K@24Hz
Supports HDR under copy EDID and Mixed EDID mode
Connectin
g
and operatin
g
1) Connect the HDMI input source to input port of HDMI splitter.
2) Connect the HDMI splitter output ports to the displays.
3) Power up splitter, source and displays.
Connection Diagram