Owner's Manual

• FAQ
Q: No image or audio output on display?
A: 1) Please check whether display on standby mode;
2) Please check whether display HDMI signal channel in accord with
HDMI input port ;
3) Please check whether " LINK " LED on RX side keeps on , LED
flash means RX does not receive signal from TX.
4) Please check whether signal indicator LED on TX turns blue ,
LED on red means no input signal;
5) Please check whether input resolution is supported by this product.
Q: Image unstable?
A: 1) Press the " LENGTH " or " RESET " button on the transmitter to
re- identify the signal;
2) Please pull & plug CAT cable on corresponding port to reconnect .
Q: Only partial ports have output?
A: 1) Please check whether CAT cable or HDMI cable connected
correctly ;
2) Press the " LENGTH " or " RESET " button on the transmitter to
re -i dentify the sig na I;
3) Please pull & plug CAT cable on corresponding port to reconnect.
• SPECIFICATION
Items
Specifications
HDMI signal
HDMI 1.3, Com atible with HDCPl.2
Support resolutions
480i@60Hz, 480p@60Hz, 576i@S0Hz, 576p@S0Hz,
720p@50/60Hz, 1080i@50/ 60Hz, 1080p@S0/60Hz
Transmit distance
Full HD resolution 1080p@60Hz up to 40 meters
via CAT6 cable
IR signal
Support 20~60kHz IR device
EDID
Support EDID setting function