Product Datasheet/Brochure

MetraPowerSports.com 1.800.221.0932
15
*Visit MetraPowerSports.com for up-to-date vehicle specific applications.
AMPLIFIER KITS
MPS-AK82
2 CHANNEL
MOTORCYCLE AMP KIT
4
UNIVERSAL
+ Left/right speaker wires and 2 channel RCA are 10’ long with a quick
disconnect for easy removal of amplifier
+ Designed for the amplifier to be mounted in the right side saddlebag
+ 8 Gauge OFC wire
+ 6’ Power and ground with ring terminals terminated
+ Power/Ground, speaker wires, and RCAs on quick disconnect for easy removal
of amplifier
+ Waterproof fuse holder with (2) 30 amp fuses
MPS-AK84
4 CHANNEL
MOTORCYCLE AMP KIT
4
UNIVERSAL
+ Front left/right speaker wires and 4 channel RCAs are 10’ long with a quick
disconnect for easy removal of amplifier
+ Left rear speaker wire is 10’ long including a 2.5’ extension jumper for added
length if needed. The extension can be removed if not needed
+ Right rear speaker wire is 3’ long
+ Designed for the amplifier to be mounted in the right side saddlebag
+ 8 Gauge OFC wire
+ 6’ Power and ground with ring terminals terminated
+ Power/Ground, speaker wires, and RCAs on quick disconnect for easy removal
of amplifier
+ Waterproof fuse holder with (2) 30 amp fuses
ST-AK8
8 GAUGE
MOTORCYCLE AMP KIT
4
UNIVERSAL
+ Designed for motorcycles
+ 6 foot length of red and black T-Spec
®
OFC power and ground wire with a
T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
+ Pre-terminated ring terminals make connections to the battery simple
+ Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon
mesh makes upgrading the factory speaker wires or adding new speakers a
smart choice
+ Even for those upgrading the Harmon Kardon system, the ST-AK8 comes with
two 47-ohm 1/2 watt resistors to keep the factory radio outputs active
+ All the necessary installation hardware is included along with a 4” x 6” hook
and loop mounting pad for micro-amplifiers to hold the amplifier in place
ST-AK10
10 GAUGE
MOTORCYCLE AMP KIT
4
UNIVERSAL
+ Designed for motorcycles
+ 6 foot length of red and black T-Spec
®
OFC power and ground wire with a
T-Spec V8MANL fuse holder and 30 amp fuse protected by a black nylon braid
+ Pre-terminated ring terminals make connections to the battery simple
+ Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon
mesh makes upgrading the factory speaker wires or adding new speakers a
smart choice
+ Even for those upgrading the Harmon Kardon system, the ST-AK10 comes
with two 47-ohm 1/2 watt resistors to keep the factory radio outputs active
+ All the necessary installation hardware is included along with a 4” x 6” hook
and loop mounting pad for micro-amplifiers to hold the amplifier in place