Installation Instructions

ManualsBrandsMetra ManualsAudioFord SWC and Data Interface 2020-Up

AXTC-FD3

INSTALLATION INSTRUCTIONS

Product Info

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections ............................................................2

Programming .........................................................3

Troubleshooting .....................................................4

Ford SWC (Steering Wheel Control)

and Data Interface 2020-Up

APPLICATIONS

• Provides accessory power

(10-amp)

• Provides wires for multimedia

radios (park brake, reverse,

speed sense)

• Retains audio controls on the

steering wheel

• Designed for non-ampliﬁed

models only

• Designed to be compatible

with all major radio brands

•

Auto detects vehicle type, radio

connection, and preset controls

• Ability to dual assign steering

wheel control buttons

• Retains memory settings even

after battery disconnection

or interface removal (non

volatile memory)

• Provides illumination output

• Micro-B USB updatable

Ford

E Series 2021-Up

Eco Sport 2020-Up

Escape 2020-Up

F250/F350/F450/F550 2020-Up

Transit 2020-Up

Transit Connect 2020-Up

• AXTC-FD3 interface • AXTC-FD3 harness

• 3.5mm adapter

Note: The AXTC-FD3 does not retain SYNC.

Summary of content (4 pages)

PAGE 1
AXTC-FD3 INS TAL L ATION INS TRUC TIONS Ford SWC (Steering Wheel Control) and Data Interface 2020-Up INTERFACE FEATURES • Provides accessory power (10-amp) • Provides wires for multimedia radios (park brake, reverse, speed sense) • Retains audio controls on the steering wheel • Designed for non-amplified models only • Designed to be compatible with all major radio brands • Auto detects vehicle type, radio connection, and preset controls • Ability to dual assign steering wheel control buttons • Retains me
PAGE 2
CONNECTIONS Vehicle Connectors Reset Button LED Light Aftermarket Radio (radio’s features may vary) Front Rear View Rear AUX-IN SWC Sub 3.
PAGE 3
PROGRAMMING 1. Open the driver’s door, and keep open during the programming process. 6. Green & Red LED 2. OFF RT STA ON ACC Cycle the ignition on and wait 5 seconds, or until the factory display screens reads LINE IN. Green LED 7. OFF ON ACC Tap Volume Up VOL + 5. Green & Red LED Locate the Volume Up button on the steering wheel. Program the interface by tapping the Volume Up button at a heartbeat pace until the LED light stops flashing. OFF ON ACC 8. Cycle the ignition off, then back on.
PAGE 4
AXTC-FD3 INS TAL L ATION INS TRUC TIONS Having difficulties? We’re here to help. Contact our Tech Support line at: TROUBLESHOOTING 1. If the interface fails to function, press and release the reset button, then repeat the programming process from step 4 to try again. LED Light 2. Reset Button At the end of programming the LED light will turn Solid Green which indicates programming was successful.