Specification Sheet

AXDSP-X SPEC SHEET
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 9/1/20 INSTAXDSP-X
Specifications
Input Impedance 1M Ohm
Input Channels 6 High/Low level Selectable
Input Options High Level or Low Level
Input Type Differential-Balanced
Input Voltage
High Level Range
0 - 28v Peak to Peak
Input Voltage
Low Level Range
0 - 4.9v Peak to Peak
Ouput Channels 10
Output Voltage Up to 5v RMS
Output Impedance 50 Ohms
Equalizer Type 31 Band Graphic EQ, +/- 10dB
THD <0.03%
Frequency Response 20Hz - 20kHz
Crossover 3-Way LPF, BPF, HPF THP per channel
Crossover Type Linkwitz-Riley 24DB Slope, Fixed
Sampling 48kHz
S/N Ratio 105dB @ 5V RMS
General
Operating Voltage 10 - 16VDC
Standby Current Draw ~7mA
Operation Current Draw ~150mA
Adjustments/Controls Application via Bluetooth
Remote Output
12VDC, Signal Sense
or with lgnition
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
[e-mail]
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 7:00 PM
Sunday: 10:00 AM - 4:00 PM
Product Info