Owner's Manual

5
REV. 10/4/21 INSTAXDIS-PO13
PROGRAMMING
L.E.D. Feedback: The (23) Red L.E.D. flashes
represent a different radio manufacturer for
the AXSWC interface to detect. For example,
if you are installing a JVC radio, the AXSWC
interface will flash Red (5) times, then stop.
Following is the L.E.D Feedback Legend,
which indicates the flash count of the radio
manufacturer
L.E.D FEEDBACK LEGEND
Flash Count Radio
1
Eclipse (type 1) †
2
Kenwood ‡
3
Clarion (type 1) †
4
Sony / Dual
5
JVC
6
Pioneer / Jensen
7
Alpine *
8
Visteon
9
Valor
10
Clarion (type 2) †
11
Metra OE
12
Eclipse (type 2) †
13
LG
14
Parrot **
15
XITE
16
Philips
17
TBA
18
JBL
19
Insane
20
Magnadyne
21
Boss
22
Axxera
23
Axxerra (type 2)
KEYNOTES
* If the AXSWC interface flashes Red (7) times, and an Alpine radio is not
installed, that means there is an open connection not accounted for. Verify
that the 3.5mm jack is connected to the correct steering wheel jack/wire
in the radio.
** The AXSWCH-PAR is required (sold separately). Also, the software in the
radio must be rev. 2.1.4 or higher.
† If a Clarion or Eclipse radio is installed and the steering wheel controls do not
function, change the radio to Clarion (type 2) or Eclipse (type 2) respectively.
If the steering wheel controls still do function, refer to the Changing Radio
Type document available at axxessinterfaces.com.
‡ If a Kenwood radio is installed and the L.E.D. feedback flashes (5) times
instead of (2), manually change the radio type to Kenwood. To do this, refer to
the Changing Radio Type document available at axxessinterfaces.com.
PROGRAMMING