Instructions

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

A X-AB-T Y3

INSTALLATION INSTRUCTIONS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip ties

TABLE OF CONTENTS

Ampliﬁer Location .................................................2

Connections ............................................................2

Toyota Tundra (Access Cab)

Ampliﬁer Bypass Harness 2005-2006

• Ampliﬁer bypass harness

• Vehicle-speciﬁc harness to bypass the factory ampliﬁer

• Allows loose wires to wire to an aftermarket ampliﬁer

• Saves the installer unnecessary labor and wire

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date

vehicle speciﬁc applications

PAGE 1
AX-AB-TY3 I N S TA L L AT I O N I N S T R U C T I O N S Toyota Tundra (Access Cab) Amplifier Bypass Harness 2005-2006 Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle specific applications • Amplifier bypass harness • Vehicle-specific harness to bypass the factory amplifier • Allows loose wires to wire to an aftermarket amplifier • Saves the installer unnecessary labor and wire TABLE OF CONTENTS Amplifier Location..........................................
PAGE 2
CONNECTIONS Gray Gray/Black White White/Black Green Green/Black Purple/White Purple/Black Front Right Speaker + Front Right Speaker Front Left Speaker + Front Left Speaker Rear Left Speaker + Rear Left Speaker Rear Right Speaker + Rear Right Speaker - Amplifier Location: Under center console 2
PAGE 3
REV.
PAGE 4
AX-AB-TY3 I N S TA L L AT I O N I N S T R U C T I O N S IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.