Owner's Manual

ASWC-1
INSTALLATION INSTRUCTIONS
REV. 11/16/18© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
Dual Assignment (long button press)
The ASWC-1 has the capability to assign (2) functions to a single button except for Volume Up and Volume Down, after the ASWC-1 has been programmed and is fully functional. This feature can be performed
by either following the steps below, through a Windows based computer using the Axxess Updater, or through the Axxess Updater app available from the Android/Apple mobile devices app store .
Notes:
a) Seek Up and Seek Down come pre-programmed as Preset Up and Preset Down for a long button press.
b) Apple mobile devices will require the use of the AX-HUB for this feature.
Attention! If more than 10 seconds elapses between steps, the procedure will abort, and the ASWC-1’s light will go out. The ASWC-1 may not function properly and may need to be reset and reprogrammed.
1. Turn the radio off.
2. Turn the key to ignition and wait until the ASWC-1’s light flashes Green 1 time then goes out.
3. Press and hold the desired steering wheel control button for 10 seconds, or until the ASWC-1’s light flashes rapidly Green, then release. The light will then turn on solid Green indicating that the
ASWC-1 is in Dual Assignment mode.
4. Press and release the Volume Up button on the steering wheel the number of times corresponding to the desired function for dual assignment. Reference the Dual Assignment Legend.
5. Press the desired button to store it to memory (the same one as in step 2). The ASWC-1’s light will now go out indicating that the new information has been stored to memory.
Note: These steps must be repeated for each button desired to assign a dual assignment feature to. To reset a button back to its default state, repeat Step 2, then press the Volume Down button on the
steering wheel. The ASWC-1’s light will go out, and the dual assignment feature for that button will be erased.
Dual Assignment Legend
Function # Function
1 Not allowed
2 Not allowed
3 Seek Up / Next
4 Seek Down / Previous
5 Mode / Source
6 ATT / Mute
7 Preset Up
8 Preset Down
9 Power
Function # Function
10 Band
11 Play / Enter
12 PTT
13 On Hook
14 Off Hook
15 Fan Up *
16 Fan Down *
17 Temp Up *
18 Temp Down *
* Not applicable in this application