Owner's Manual

ManualsBrandsMetra ManualsMobile PhonesASWC-1

Table Of Contents

ASWC-1

INSTALLATION INSTRUCTIONS

Integrate • AxxessInterfaces.com

Remapping

After the ASWC-1 has been programmed and functioning properly, the button assignment for the steering wheel controls may be reassigned. For example, Seek Down may be preferred to be Mute instead.

This feature can be performed by either following the steps below, through a Windows based computer using the Axxess Updater, or through the Axxess Updater app available from the Android/Apple

mobile devices app store.

Note: Apple mobile devices will require the use of the

AX-HUB

for this feature.

Attention! If more than 20 seconds elapses between steps, the procedure will abort, and the ASWC-1’s light will go out. The ASWC-1 may not function properly and may need to be reset and reprogrammed.

1. Turn the key to ignition and wait until the ASWC-1’s light ﬂashes Green 1 time then goes out.

2. Immediately press and hold the Volume Up button on the steering wheel until the ASWC-1’s light turns on solid Green, then release. The light will then go out indicating

Volume Up

has now been

programmed.

Press and hold the Volume Down button on the steering wheel until the ASWC-1’s light goes solid Green, then release. The light will then go out indicating Volume Down has now been programmed

4. Continue from Seek Up / Next in the Button Function Legend to reference the order in which the steering wheel control buttons must be programmed.

Note: If a function in the legend is not present on the steering wheel, press the Volume Up button on the steering wheel until the ASWC-1’s light turns on solid Green, then release. This will tell

the ASWC-1 to skip that function.

5. To complete the remapping process, press and hold the Volume Up button on the steering wheel until the ASWC-1’s light goes solid Green, then goes out. Release the Volume Up button on the

steering wheel at this point. The remapping process is now complete.

Button Function Legend

Function # Function

1 Volume Up

2 Volume Down

3 Seek Up / Next

4 Seek Down / Previous

5 Source / Mode

6 Mute

7 Preset Up

8 Preset Down

9 Power

Function # Function

10 Band

11 Play / Enter

12 PTT (push to talk)

13 On Hook

14 Off Hook

15 Fan Up *

16 Fan Down *

17 Temp Up *

18 Temp Down *

* Not applicable in this application

Note: Certain radios may not have these commands. Please refer to the manual provided

with the radio, or contact the radio Manufacturer for speciﬁc commands recognized by

that particular radio.