Product Datasheet/Brochure

REV. 1/5/2018 INST99-9721
3
DASH DISASSEMBLY
(CONT.)
(Figure E)
(Figure F)
(Figure G)
(Figure H)
6. Remove (2) push pins inside the radio
cavity behind the start/stop button.
(Figure E)
7. Remove the 13mm bolt holding each
mirror to its base, then set the mirrors
aside. Note: The bases do not need to
be removed, but can be if so desired.
(Figure F)
8. Remove (2) T-25 screws from
underneath each of the (2) painted dash
side trims from under the front side
of each trim, then unclip and remove.
(Figure G)
9. Remove (8) T-40 screws holding the
top dash panel, then if the mirror bases
were not removed in step 7, pull each
side over the mirror base (1 side at a
time). (Figure H)
10. Lift the dash trim and unplug the
buttons and switches by the radio
opening. (Figure H)
11. The dash panel is now free, lift up to
remove and set aside. (Figure H)
Continue to Kit Preparation