Specifications

ManualsBrandsMetra Manualschassis components99-9011

INSTALLATION INSTRUCTIONS FOR PART 99-9011

1-800-221-0932 www.metraonline.com

KIT FEATURES

• DIN Head Unit Provision with pock

• ISO Head Unit Provision with pocket

• Double DIN Head Unit Provision

• ISO Stacked Head Unit Provision

A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) DDIN Brackets • E) DDIN Trim Plate • F) Pocket

KIT COMPONENTS

99-9011

CC 2009-10/EOS 2007-10/New Jetta 2005-10

GLI 2008-10/GTI 2006-10/Passat 2006-10

Rabbit 2006-09/R32 2008/Tiguan 2009-10

Golf 2010

Applications

T-20 Torx Screwdriver • Flat Blade Screwdriver Or Panel Removal Tool

TOOLS REQUIRED:

WIRING AND ANTENNA CONNECTIONS (Sold Separately)

Wir

e harness:

• XSVI-9003-NAV VW Interface 2003-up

Antenna adapter:

• 40-EU55-adapter for amplified antenna 2002-up

Summary of content (12 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-9011 Applications VW CC 2009-10/EOS 2007-10/New Jetta 2005-10 GLI 2008-10/GTI 2006-10/Passat 2006-10 Rabbit 2006-09/R32 2008/Tiguan 2009-10 Golf 2010 99-9011 KIT FEATURES • DIN Head Unit Provision with pocket • ISO Head Unit Provision with pocket • Double DIN Head Unit Provision • ISO Stacked Head Unit Provision KIT COMPONENTS A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) DDIN Brackets • E) DDIN Trim Plate • F) Pocket B A E F C D WIRING AND ANTEN
PAGE 2
99-9011 TABLE OF CONTENTS • Dash Disassembly - GLI 2008 -10................................................................................1,2 - GTI 2006-09.................................................................................1,2 - New Jetta 2005-10......................................................................1,2 - Rabbit 2006-09............................................................................1,2 - R32 2008 .....................................................................
PAGE 3
99-9011 DASH DISASSEMBLY NEW JETTA 2005-10/GLI 2008-10 GTI 2006-09/RABBIT 2006-09 R32 2008 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the grille from the top-center of dash. (Figure A) 3 Remove one T-20 torx screw from black insert from under grille removed in step one. (Figure B) 4 Remove insert. (Figure C) 5 Remove two T-20 torx screws from under black insert removed in step two.
PAGE 4
99-9011 DASH DISASSEMBLY NEW JETTA 2005-10/GLI 2008-10 GTI 2006-09/RABBIT 2006-09 R32 2008 6 Unsnap and remove the vent assembly above the radio. (Figure E) 7 Remove two T-20 torx screws from top sides of radio/climate panel. (Figure F) 8 Remove panel. (Figure G) 9 Remove four T-20 torx screws to remove the radio.
PAGE 5
99-9011 DASH DISASSEMBLY CC 2009-10 / PASSAT 2006-10 JETTA SPORT WAGON 2010 GOLF 2010 / GTI 2010 1 Disconnect the negative battery terminal to prevent an accidental short circuit. A 2 Unclip and remove trim panel surrounding radio. (Figure A) FM2 FM 103.7MHZ CD AM SCAN ON BASS BAL TREB FAD TUNE VOL 3 Remove (4) T-20 Torx screws to remove radio.
PAGE 6
99-9011 DASH DISASSEMBLY TIGUAN 2009-10 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove passenger air bag light panel to the right of the hazard light button. (Figure A) 3 Unclip and remove the panel with the two slots in it to the left of the hazard light button. (Figure A) 4 Remove (2) T-20 Torx screws exposed behind the two panels removed in the two previous steps. (Figure B) 5 Unclip and remove the trim panel surrounding the radio.
PAGE 7
99-9011 DASH DISASSEMBLY EOS 2007-2010 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the radio trim panel. (Figure A) 3 Remove the (4) screws securing the radio. Unplug and remove the radio.
PAGE 8
99-9011 KIT ASSEMBLY DIN HEAD UNIT PROVISION WITH POCKET 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure A) A 2 Slide the aftermarket head unit into the cage and secure. (Figure B) 3 Snap the pocket into the radio housing.
PAGE 9
9-9011 KIT ASSEMBLY ISO HEAD UNIT PROVISION WITH POCKET 1 Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure A) 2 Slide the head unit into the radio opening until the side clips engage. (Figure B) 3 Snap the ISO Trim Plate into the Radio Housing. (Figure C) A B 4 Snap the pocket into the radio housing.
PAGE 10
99-9011 KIT ASSEMBLY DOUBLE DIN HEAD UNIT PROVISION 1 Cut and remove center divide from radio housing. (Figure A) A 2 Snap the DDIN brackets to the inside edge of the radio housing. (Figure B) 3 Slide the DDIN radio unit into the DDIN bracket/radio housing assembly and secure the unit to the kit using the screws supplied with the head unit. (Figure C) B 4 Snap the DDIN trim-plate onto the housing/radio assembly.
PAGE 11
99-9011 KIT ASSEMBLY STACKED ISO HEAD UNIT PROVISION 1 Cut and remove center divider from radio housing. (Figure A) A 2 Snap the DDIN brackets to the inside edge of the radio housing. (Figure B) 3 Slide the stacked ISO DIN units into the DDIN bracket/radio housing assembly and secure the units to the kit using the screws supplied with the head units. (Figure C) B 4 Snap the DDIN trim-plate onto the housing/radio assembly.
PAGE 12
99-9011 FINAL ASSEMBLY FINAL ASSEMBLY A B C A) Strip wire ends back 1/2" B) Twist ends together C) Solder D) Tape D 1 2 3 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.) Re-connect the negative battery terminal and test the unit for proper operation. Reassemble in reverse order of disassembly.