User Manual

99-8906HG
Kit Assembly
ISO DIN radio provision with pocket
1. Mountthepockettothebrackets
withthe(4)#8x3/8”Phillips
screwssupplied.(FigureA)
2. Slidetheradiointotheassembly
andsecurewiththescrews
suppliedwiththeradio.(FigureB)
3. Locatethefactorywiringharness
andantennapluginthedash
andmakeallnecessarywire
connectionstotheradio.Metra
recommendsusingtheproper
matingadaptersfromMetra
and/orAXXESS.
4. Mountthenewradioassembly
intothedash.
5. Attachthe(4)factorypanelclips
tothe99-8906HGradiotrimpanel.
6. Reassemblethedashinthe
reverseorderofdisassemblyusing
the99-8906HGradiotrimpanel.
3
(Figure A) (Figure B)